Linux version 2.6.8.1 (root@entropy) (gcc version 3.3.4 (Debian 1:3.3.4-9)) #1 SMP Thu Aug 19 19:44:10 CEST 2004 BIOS-provided physical RAM map: BIOS-88: 0000000000000000 - 000000000009f000 (usable) BIOS-88: 0000000000100000 - 0000000001000000 (usable) user-defined physical RAM map: user: 0000000000000000 - 00000000000a0000 (usable) user: 0000000000100000 - 0000000080000000 (usable) 1152MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4ff0 On node 0 totalpages: 524288 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 294912 pages, LIFO batch:16 DMI not present. ACPI: Unable to locate RSDP Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 Processor #3 6:1 APIC version 16 Processor #0 6:1 APIC version 16 Processor #1 6:1 APIC version 16 Processor #2 6:1 APIC version 16 I/O APIC #8 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 4 Built 1 zonelists Kernel command line: BOOT_IMAGE=linux-2-6-8-1 ro root=4801 memmap=exactmap memmap=640k@0 memmap=2047M@1M Initializing CPU#0 CPU 0 irqstacks, hard=c046a000 soft=c0466000 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 200.103 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Pentium Pro with Errata#50 detected. Taking evasive action. Memory: 2074516k/2097152k available (2341k kernel code, 21252k reserved, 924k data, 188k init, 1179392k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 389.12 BogoMIPS Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0000fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0000fbff 00000000 00000000 00000000 CPU: L1 I cache: 8K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 0000f3ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. CPU0: Intel Pentium Pro stepping 07 per-CPU timeslice cutoff: 1460.51 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 CPU 1 irqstacks, hard=c046b000 soft=c0467000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 398.33 BogoMIPS CPU: After generic identify, caps: 0000fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0000fbff 00000000 00000000 00000000 CPU: L1 I cache: 8K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 0000f3ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium Pro stepping 09 Booting processor 2/1 eip 2000 CPU 2 irqstacks, hard=c046c000 soft=c0468000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 399.36 BogoMIPS CPU: After generic identify, caps: 0000fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0000fbff 00000000 00000000 00000000 CPU: L1 I cache: 8K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 0000f3ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: Intel Pentium Pro stepping 09 Booting processor 3/2 eip 2000 CPU 3 irqstacks, hard=c046d000 soft=c0469000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 399.36 BogoMIPS CPU: After generic identify, caps: 0000fbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 0000fbff 00000000 00000000 00000000 CPU: L1 I cache: 8K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: 0000f3ff 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: Intel Pentium Pro stepping 07 Total of 4 processors activated (1586.17 BogoMIPS). ENABLING IO-APIC IRQs Setting 8 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 8 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 8-0 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 16. number of IO-APIC #8 registers: 16. testing the IO APIC....................... IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 1 1 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 0 0 1 1 71 0a 001 01 1 1 0 0 0 1 1 79 0b 001 01 1 1 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 199.0967 MHz. ..... host bus clock speed is 66.0655 MHz. checking TSC synchronization across 4 CPUs: passed. Brought up 4 CPUs CPU0: online domain 0: span 1 groups: 1 domain 1: span f groups: 1 2 4 8 CPU1: online domain 0: span 2 groups: 2 domain 1: span f groups: 2 4 8 1 CPU2: online domain 0: span 4 groups: 4 domain 1: span f groups: 4 8 1 2 CPU3: online domain 0: span 8 groups: 8 domain 1: span f groups: 8 1 2 4 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0066, last bus=3 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: PnP BIOS support was not detected. SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: i440KX/GX host bridge 0000:00:19.0: secondary bus 00 PCI: i440KX/GX host bridge 0000:00:1a.0: secondary bus 02 PCI BIOS passed nonexistent PCI bus 3! PCI BIOS passed nonexistent PCI bus 1! PCI BIOS passed nonexistent PCI bus 1! PCI: Device 02:78 not found by BIOS PCI: Device 00:78 not found by BIOS PCI: Device 00:a0 not found by BIOS PCI: Device 00:c8 not found by BIOS PCI: Device 00:d0 not found by BIOS TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca) Starting balanced_irq audit: initializing netlink socket (disabled) audit(1093030018.4294965722:0): initialized highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found lp: driver loaded but no devices found Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport0: PC-style at 0x3bc [PCSPP(,...)] lp0: using parport0 (polling). Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Compaq SMART2 Driver (v 2.6.0) cpqarray: Device 0xae10 has been found at bus 3 dev 0 func 0 cpqarray: Finding drives on ida0 (SMART-2/P) cpqarray ida/c0d0: blksz=512 nr_blks=16755795 ida/c0d0: p1 p2 < p5 p6 > p3 Compaq CISS Driver (v 2.6.2) mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 oprofile: using NMI interrupt. NET: Registered protocol family 2 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 524288 bind 65536) ip_conntrack version 2.1 (8192 buckets, 65536 max) - 300 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 188k freed Adding 722876k swap on /dev/ida/c0d0p6. Priority:-1 extents:1 EXT3 FS on ida/c0d0p1, internal journal Real Time Clock Driver v1.12 kjournald starting. Commit interval 5 seconds EXT3 FS on ida/c0d0p5, internal journal EXT3-fs: mounted filesystem with ordered data mode. ThunderLAN driver v1.15 TLAN: eth0 irq= 5, io=5000, Compaq Netelligent Dual 10/100 TX PCI UTP, Rev. 16 TLAN: eth1 irq= 9, io=5010, Compaq Netelligent Dual 10/100 TX PCI UTP, Rev. 16 TLAN: 2 devices installed, PCI: 2 EISA: 0 cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 TLAN: eth0: Starting autonegotiation. TLAN: eth0: Autonegotiation complete. TLAN: eth0: Link active with AutoNegotiation enabled, at 100Mbps Full-Duplex TLAN: Partner capability: 10BaseT-HD 10BaseT-FD 100baseTx-HD 100baseTx-FD NET: Registered protocol family 10 Disabled Privacy Extensions on device c03e9b60(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present